Canadian Electrical Wholesaler

Jan 11, 2019

Rupali JainBy Jennifer Ng


Born and raised in western India, Rupali’s passion for mathematics and science began at a young age. In school, she excelled in mathematics and biology, and initially wanted to pursue an education in medicine; but by the time she reached the end of her high school career, Rupali realized a passion that was drawing her to mathematics and pursued a university career in electrical engineering.

Her engineering studies exposed her to electrical power systems, power system analysis, and electricity transmission and distribution concepts. Rupali was more interested in the distribution element of electricity, which bridges the gap between the sometimes obscure technological world of large-scale transmission, to the day-to-day lives of utility customers whose daily lives rely on crucial energy systems. She continued to excel in her academics, and by the end of her undergrad Rupali found a job in a power consulting firm in western India, but wasn’t destined to stay there for long. After an eight-year application process, Rupali and her family were accepted for permanent residency in Canada, and Rupali was both excited and nervous about taking the next step in her career in a totally different country and culture.

A new career in a new country

When Rupali arrived in Canada, she decided to pursue a Master of Engineering. She applied to University of Waterloo, was accepted in 2010, and began her studies on power systems analysis, distributed generation, and power system protection and control.

Her interest in smart microgrids and research and development in power system design led her to a Master of Applied Science (MASc), where she worked with two of the finest professors in the power system industry. She then turned her focus to distributed renewable generation at the local-level, studying average household electricity use, the relationship between electricity and geography, and how devices inside the house (e.g., smart devices) could help people actively manage their power and increase their energy cost savings.

She had the opportunity to present some of her findings at the 2012 Canadian National Committee of the International Council on Large Electric Systems (CIGRE) Canada Conference; she found that people were very encouraging, and actively engaged her on her research and ideas. One of these people included the CEO of METSCO Energy Solutions, who was so interested in her research that he asked Rupali to contact him on the completion of her studies; she finished in 2012 and was offered a new job right away.

During her time with METSCO, she worked on a variety of projects focused on distribution analysis, studies for utilities, and connection impact assessments to examine how distributed generation relates to and impacts electricity systems. One of these projects was developing protection logic with S&C, where she had the opportunity to work with technicians in the field in Kitimat, BC. While she was the only woman on the project, she was confident in her knowledge and experience, and found the technicians friendly and focused on teamwork. Rupali continued her work with the S&C team for over a year; she worked with different teams including engineering and field service, and by the end of the project S&C was so impressed with her work and dedication that they offered her a job.

Career development and S&C Electric Canada Ltd.

Receiving a job offer the middle of another career, Rupali was unsure what to do. She was pleasantly surprised to find that her own manager with METSCO was encouraging and supportive of her career goals. Rupali notes, “I knew this was a great opportunity, but I was wrestling with the uncertainty that comes with a career diversion. Having an honest conversation with METSCO and S&C made me confident that it was the right jump to make.”

In November 2014, she decided to take the leap, and joined the S&C team. Her role has changed quite a bit since then: she moved from smaller projects to large-scale system-level projects, which require planning, design and engineering, and testing and commissioning on site. She even had the opportunity to work on a project with the Department of National Defense, to integrate distributed generation to improve resilience and flexibility to their facilities.

One of the most exciting aspects for Rupali is seeing her designs on paper come to life. At S&C, she was expected to engage both technical and non-technical aspects of her work. For example, S&C emphasizes the importance of quality, so Rupali explicitly inquired about what that expectation meant. Rupali has always understood the importance of continuing to learn, and actively looking for ways to improve her knowledge. From her conversation about quality, Rupali put together a presentation outlining the importance of engineering work quality and what it means, and would share this presentation with other engineers, especially those who were new to her team. She even had the opportunity to present it at the Electricity Distribution Association (EDA) Conference in 2016, where she was thrilled to be able to help other young engineers.

Throughout her time at S&C, Rupali has felt encouraged and supported, both in the technical/non-technical field. Rupali explained: “whenever I experience doubt or concerns, I speak to people with more experience, and won’t shy away from asking for advice,” something she encourages all young people to do. There are many experienced people throughout the industry who are happy and willing to support young professionals with a word of advice, or some general insight/wisdom about the industry as a whole.

Case study: distributed generation

Since her university days, Rupali’s research and interests have always revolved around distributed generation, which grows increasingly important with the continued growth of the renewable distributed grid. We asked Rupali to talk a little about how the electricity system landscape is changing from the perspective of distributed generation, and she explained: “traditional models of generation, transmission and distribution have been largely centralized and unidirectional: large-scale power producers distribute their electricity through the transmission system, and customers use and pay for power. But the landscape is evolving, with the introduction of consumer-scale generation such as solar panels and even storage systems.”

These technologies are propelling change, and utilities are actively looking to answer the question as to how these new unprecedented generation models will potentially impact their systems. Historically, power systems have been largely inflexible, and utilities have to start thinking about power flowing two ways as customers start producing and selling their electricity back to the grid in a safe and reliable way.

In Rupali’s own work, for example, she’s worked with distributed energy resources that are sensitive electronic devices, which can be damaged by even small fluctuations; system planners and engineers have to account for the fact that reversing power flows can damage equipment and reduce its overall lifespan. Rupali comments that there will be increasing loads on transmission lines, which means potential larger system costs and a greater focus on balancing equipment. There are a number of technical challenges to consider before connecting distributed generation, which is slated to grow in the coming years.

Having herself worked on complex system impact assessments, Rupali sees an opportunity here to address a very large system-wide challenge — a number of stakeholders will have to come together to establish the groundwork for tomorrow’s grid, including regulators, local utilities, and customers (both generators and loads). Historically, these systems have been designed top down, but that isn’t a feasible way to move forward with an increasing amount of distributed generation.

In Rupali’s opinion, better long-term planning can help ensure that costs are considered and distributed fairly, and that the procedures and rules are established in a robust way to reduce islanding, where loads may disconnect from the grid entirely, then reconnect on their own. This will become more salient with the increasing installation of energy storage facilities (e.g., batteries); industrial customers that disconnect and reconnect to the grid by their own schedules can wear down or damage equipment, and have larger system planning implications, so regulators will have to support utilities to help them meet the challenge of balancing their systems in the long-term. Rupali, along with the S&C team, are excited for what the future will bring in the electricity grid of tomorrow.

Jennifer Ng is a Senior Analyst, Renewable Development at Invenergy LLC and a volunteer writer for WiRE (Women in Renewable Energy). This profile was first publishing online by WiRE

Latest Articles

  • Prev
Britech Corp, one of Canada’s largest heating cable companies has signed a formal agreement with ...
Leaders and innovators from business, government and the education sector gathered for this ABB ...
Hitachi has a deal with industrial giant ABB to purchase 80% of their Power Grids division for ...
I can still remember August 5, 2014 like it was yesterday. This date marks my first day as a ...
In setting growth plans for the coming year, one should ask, “What percentage of my customers might ...
The stigma behind dealing with contractors has forever been “they are a tough group to build a ...
Perhaps the better question is, “Why does it matter what young marketers want?” The answer is that ...
The Channel Marketing Group / William Blair Q3 2018 Pulse of Lighting Report shows that the ...
Following months-long renovations, Deschenes officially opened a renovated service counter at its ...
A question I sometimes ask managers and salespeople when I speak at conferences is, “How much ...

 

Rick McCartenWith an outstanding record turnout at this year’s EFC Conference in Quebec City, delegates were asked to attend a workshop on our supply chain.

Delegates voted on several issues that would help advance our industry towards digitalization, improved performance, ease of doing business, and improved data.

Why?

Why do we need a workshop for our industry? All of our research over the years to supply chains customers shows that brand loyalty is mixed — it’s almost 50/50 between the manufacturer and the distributor. 

Read More

 

 

 

CybersecurityDuring a recent Industrial Control Systems Joint Working Group meeting, representatives from the National Electrical Manufacturers Association (NEMA), U.S. Department of Defense (DOD) and International Society of Automation (ISA) outlined a new program to address the growing risk of unprotected and under-protected building control systems in the U.S. and abroad.

Building owners, users, and manufacturers of control systems continuously work to find practical ways to create safe and more secure environments.

 

Read More

 

IdeaIDEA plans to introduce an online learning management tool, the IDEA Learning Portal, to train customers on the new IDEA Connector, which will launch in late September. This portal will contain comprehensive training information and documentation on the IDEA Connector, a master data management (MDM) platform that enables distributors to securely access accurate and timely product and pricing data directly from manufacturers.

To complement the portal, there will be four training session devoted to manufacturers and distributors at eBiz. These training sessions will dive deeper into specific content to ensure a complete understanding of important functionality.

Read More

LFI Innovation AwardsThe celebrated LFI Innovation Awards marked the opening this week of the 2019 Lightfair International Trade Show and Conference with a dramatic showcasing of the industry’s most innovative products and designs introduced during the last 12 months.

The 2019 awards and trade show opening mark the 30th anniversary of the world’s largest annual lighting and technology event. The 2019 awards saw entries spanning 14 categories, with each submission judged by an independent panel of lighting professionals. Winning entries exemplified the best in innovative design and thinking. 

Read More

 

Automation LabourforceBy: Thomas Donato, Rockwell Automation

We all are consumers. We all have expectations of quality and service.

When I talk to our customers, I do so with that experience and mindset. If we don’t deliver – we lose. Maybe not immediately, but eventually. It’s as simple as that.

I just lived through a great example of this. Every morning I use our blender. One of the parts broke, and the manufacturer made it quite difficult and cumbersome to get a replacement.

Read More

Changing Scene

  • Prev
Richard Do joined Westburne’s Senior Leadership Team as the new Divisional Sales Manager for ...
The Great Canadian Data Centre Symposium was held on June 19-20 at McMaster Innovation Park, ...
At Electro-Federation Canada’s recent Annual General Meeting in Quebec City, the Nominating ...
Pilz Canada officially opened their Canadian Facility surrounded by Industry Partners, colleagues ...
Dr. Jayson Meyers, CEO of NGen — Next Generation Manufacturing Canada — will present on the topic ...
Last week, over 540 industry members and guests gathered at the EFC Conference in Quebec City, ...
Cree, Inc. has completed the sale of its Lighting Products business unit, Cree Lighting, to Ideal ...
Kelly Hanson has joined Ryan and Chris Maguire as agency Principal. Kelly has an extensive sales ...
AD, the contractor and industrial products wholesale buying/marketing group, reported a 7% increase ...
Legrand has promoted Scott Bausch to Vice President/General Manager for the Wiremold product ...

Eric TeacherLiteline Corporation is pleased to announce the promotion of Eric Teacher to National Specification Manager for Canada.

Eric Joined Liteline in February as Regional Manager - Specifications for Ontario, Canada and quickly became an indispensable resource to the Sales, Marketing and Product Development teams. Eric has extensive experience in the Lighting and Controls industry.

 

 

Read More

 

 

ESAThe Electrical Safety Authority's (ESA's) Board of Directors is pleased to announce that Arjan Arenja, President, Spectrum Development Inc., Walter Pamic, Co-owner, Power-Tek Electrical Services Inc., and Ysni Semsedini, CEO, Festival Hydro have been appointed to the ESA Board of Directors.

"I am pleased to welcome our new members to the Board and look forward to their expertise and contributions to support ESA's mandate to enhance safety, and administer the province's electrical safety regulations during a period of rapid change and renewal," says Peter Gregg, Chair, Board of Directors, ESA.

Read More

 

Jules MarchildonTechspan Industries is pleased to announce that Jules Marchildon has joined our Fusetek division in the position of Ontario Regional Sales Manager.

Jules comes to us with over 30 years of experience selling Power Electronic products, most recently as the Electrical Sales Manager at Mersen. He has also worked for a Distributor and for a Manufacturers Rep Agency, which has given him a broad understanding of the entire electrical channel. Jules brings with him proven leadership and technical sales.

 

 

Read More

 

 

Looking Back

  • Prev
The best memory I keep from CEDA is the way that they accepted me when I came into the business. ...
In the 1930s to 1940s, CEDA’s Western Canada membership was very stable with old line independent ...
Prior to the late 1950s there was little if any involvement in CEDA by the so-called “national ...
  As 2017 marks the 150th anniversary of Confederation, we take a look back at an aspect of ...

Copper $US Dollar price per pound

Kerrwil Publications

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2019 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil