Canadian Electrical Wholesaler

3D Printing

Zachary Smith
For decades, manufacturers have used 3D printers for prototyping and small run custom items, so we’re all aware that additive manufacturing is more innovative and useful than making 3D printed selfies.
As the use of 3D printing technology increases in the industrial sector, there are major improvements in new product development, lead-time, customization, and warehouse efficiency. However, it is the supply chain that will be among the most impacted segments of the industry. 

What’s the opportunity here?

With this shift, initial production cost and run time may increase, but the reduced cost of real estate and repairs and offsetting the job gap will pay off in the long run. And with more 3D printers saturating the market, sourcing locally will drive costs lower by cutting out long distance distribution. Ultimately, thanks to the new capabilities of 3D printing, designing is becoming more efficient and fewer components are needed, resulting in a cheaper supply chain overall.

Can this change drive innovation?

Frost & Sullivan predicts 3D printing will raise its market share by 40 percent by the end of 2015 [1], but there is time to adjust. Even with additive manufacturing’s history, 3D printing is still finding its place in the world. It will be a long time before a 3D printer can perform on a level that can compete with mass production.

Reacting by bringing 3D printing into the supply chain now and analyzing how it can enhance your business model may set you up for success later on. This isn’t a scare tactic, but a call for innovation. After all, history shows that change will often offer more opportunity and rewards than may initially appear. 

Should we take precautionary action?

Putting aside the opportunity to innovate we mentioned above, the short answer is that it’s too soon to tell. It’s best to focus first on what 3D print offers that traditional mass production does not. Already commonly used for custom products, the ease into automation and the Internet of Things that 3D printers allow would bring this to a much larger scale. With multiple printers, custom products can become a much more profitable business as it meets the demand of unique items for each customer.

Additionally, 3D printing can offer solutions to some problems mass manufacturing has always presented. Over time, it will affect sustainable operations, time of operations, storage, and delivery. Material waste will dramatically fall, limiting material usage to only what is needed. 3D printers can do the work of many machines, eliminating the need for those machines, the huge production facilities they occupy, and their assembly workers. Finally, storage and warehousing will decrease dramatically when space isn’t needed for a 10,000-part run.

It’s clear that 3D printing is one of the many considerations to factor into the future of supply chain, but you can start making changes immediately. Head over to to find additive manufacturers for your next prototype or small-run job.


Zachary Smith is the Digital Marketing Associate at ThomasNet, where he assists in content development, email campaigns and social media management. This article was first published as a ThomasNet blog posting.

1. Jithendranath Jithendranath, “3D Printing Technology - 9 Dimensional Assessment (Technical Insights),”





Carol McGloganBy Carol McGlogan

We are on the cusp of a major tidal wave hitting our industry; the onslaught of 10,000 new employees are set to replace the current base who are over 55 years of age and are on the horizon of retirement. This talent refresh brings on many opportunities for progress to address evolving customer needs, new product solutions and supply chain digitization. New skills and new ways of thinking will propel us forward. However, the challenge this talent pool will have is to understand the industry that they have settled in. This challenge is further magnified as the time required to absorb industry knowledge is compressed due to the accelerated exit of industry knowledge.

Read More


Swati Vora-PatelBy Swati Vora-Patel

The Electrical industry is facing a runway of crossroads — and digital innovation intersects each one of the crossroads. Digital advancements in technology are transforming everything from product development and manufacturing to supply chain management and customer purchasing behaviours. While all of these changes have digitization at the core, there’s another factor that our industry needs to bring front and centre: People.




Read More

Value of Building Permits - DecemberThe total value of building permits issued by Canadian municipalities increased 7.4% to $8.7 billion in December. Increases were reported in five provinces, led by Ontario (+10.5% to $3.4 billion) and Quebec (+15.8% to $2.2 billion). For 2019 overall, municipalities issued $102.4 billion worth of permits, up 2.6% compared with 2018.

Value of residential permits up

The total value of permits for multi-family dwellings was up 15.9% to $2.9 billion in December, mostly due to large projects in the census metropolitan areas (CMAs) of Montreal and Vancouver.

Read More


Changing Scene

  • Prev
On January 31,2020, the new IDEA Connector will go live to over 6500 distributor locations with ...
Arlington Industries has announced the recipients of their rep sales awards for 2019.   ...
EDGE Global Supply, through its subsidiary Technology BSA, completed the acquisition of RK ...
AD is reporting total 2019 member sales across its 12 divisions were $46.3 billion, an increase of ...
WESCO International announces its results for the fourth quarter and full year 2019.   ...
After six years as president of AD’s Electrical Business Unit and chief marketing officer, Ed ...
WESCO International, Inc. and Anixter International Inc. have announced that their boards of ...
OmniCable has announced the promotion of Chip Barrett to Vice President of Supply Chain and ...
Tom was an entrepreneur, father, grandfather, partner, brother, uncle, friend and humanitarian who ...
AD reported a 13% increase in member sales across its 12 divisions, totaling $35 billion in the ...

IDEA Connector LaunchOn January 31,2020, the new IDEA Connector will go live to over 6500 distributor locations with updates being fed daily by the IDW. Distributors will gain access to IDEA Connector’s Production Environment on February 14, 2020 to verify their migrated extracts and custom maps before they are fully cutover in a phased approach from the IDW to IDEA Connector beginning March 22, 2020.

The IDEA Team is working to ensure a smooth launch. If you are a distributor customer, you’ll receive communications on your cutover date and what you’ll need to do to prepare.

Read More





SouthwireSouthwire has appointed Rahila Dhansi to the position of Manager, Human Resources. In her role, Rahila will be responsible for overseeing Southwire Canada’s HR plans in ways that support our mission and strategy.

Rahila holds a Bachelor’s degree in Employment and Industrial Relations from the University of Toronto and is a Certified Human Resources Leader (CHRL) under the Human Resources Association.



Read More


Graybar TaylorGraybar Canada announced the retirement of Executive Vice President and General Manager, Brian Thomas, effective March 1, 2020. Upon his retirement, Jason Taylor will be appointed Executive Vice President and General Manager, assuming leadership of Graybar Canada.

Thomas started his career with Graybar Canada, and its predecessor Harris & Roome Supply, in 1987. Throughout his 39-year career in the electrical industry, Thomas held a variety of sales and senior management positions before being promoted to Executive Vice President and General Manager in 2016. 

Read More



Peers & Profiles

  • Prev
Sean Bernard is the Intelligent Controls Manager, Canada for Ideal Industries. Sean resides in ...
Christina Huang is a Senior Contracts Manager for Schneider Electric. She has a varied, technical ...
Jenny Ng is a Business Development Manager for the Power Solutions Division of Schneider Electric. ...
With over 60-years of experience in the lighting industry, CBC Lighting has established itself as a ...

Sean BernardBy Blake Marchand

Sean Bernard is the Intelligent Controls Manager, Canada for Ideal Industries. Sean resides in Whitby with his wife, Melissa and their daughter, Everleigh.

Sean joined Ideal Industries mid-2019 after 13-years in lighting, working for companies like Phillips, Franklin Empire, and Standard Products. Throughout that time, he made his way from inside sales, to outside sales and up into management.



Read More


Looking Back

Has no content to show!

Copper $US Dollar price per pound

Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2020 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil