Canadian Electrical Wholesaler

September 30, 2018

Looking BackIn the 1930s to 1940s, CEDA’s Western Canada membership was very stable with old line independent companies like Horsman, Ashdowns, Brettell, Marshall Wells, Electrical Supplies Ltd., etc.

Small electrical distributors just were not acceptable for membership as they did not carry the main-line manufacturers’ goods, publish a wiring device catalogue, or employ four to five salesmen as CEDA requested.

However, with the end of World War II in 1945, and with the return of men from overseas, the optimism of business upturn was very evident. In Western Canada, provincial governments were intent on pushing rural electrification. This was the turning point in the rapid growth of the electrical industry, and so newcomers entered the distribution field.

Still CEDA would not accept small distributors. CEDA’s Secretary Manager maintained that to join they had to buy/sell the main line merchandise, yet when the distributor approached the manufacturer, the reply was, “Join CEDA and we will sell to you.” A catch-22 situation. For some years small enterprising distributors had to either buy in the USA of from small manufacturers. However, some commercial and residential manufacturers saw the potential of specialty distributors and sold to them.

In the early 1950s, with the rapid expansion of all phases of the electrical industry, CEDA finally accepted membership from smaller distributors who by now has established a firm hold in their communities.

In the early days CEDA always held their annual meetings in Niagara Falls at the General Brock Hotel. Later they diversified to various locations in Ontario and Quebec, and in 1959 they ventured west to the Banff Springs Hotel, Alberta for their 25th Anniversary convention. It was not until the 1970s that a regular policy of moving the conventions across Canada was implemented.

For much of the 1950s and 60s, CEDA held a fall convention for Western members only, meeting regularly in such places as Banff, Minaki, Saskatoon, Winnipeg, and Jasper. Finally those Western only meetings were cancelled in favour of concentrating attendance on the annual meeting at which attendance by manufacturers was rapidly increasing.

CEDA conventions have enjoyed remarkable growth and is the only industry convention (in Canada) that has manufacturers and wholesalers in attendance in large numbers.When we look back to the early days of CEDA, it is gratifying to see the progress that has been made. As one who has worked with six CEDA managers from 1950 on — Dick Edmunds, Norman Franks, Doug McKellar, Norm McKellar, Dick Taylor and Stan Wild — it was these men who did the spade work that backed up the elected Directors that has made CEDA such a successful association.

 

Flir Application SpotlightWithout power, factory operations cannot continue. That’s why regular scheduled maintenance is important to ensure your electrical distribution system is in working order. A combination of a thermal imager and a clamp meter can help you detect hot spots and diagnose electrical issues at the point of failure before an outage occurs, quickly and safely.  Download the Application Spotlight today.

 

 

 

 

Read More

 

 

 

3M Canada WebinarRegister for 3M Canada’s upcoming webinar: How TTS™ Heat Trace Cables can help you on site.

3M Canada will be hosting a heat trace cables webinar, where you’ll learn about heat trace, heat trace applications (i.e.: pipe freeze protection, roof and gutter, and surface snow and ice melting), and the benefits of self-regulating heat trace cables—TTS™ Heat Trace Cables.

 

 

 

 

Read More

 

Stephanie MedeirosBy Blake Marchand

Stephanie Medeiros leads ABB Canada’s Electric Vehicle Charging Infrastructure team, as well as transit bus charging in the United States and Canada. She has been with ABB in various positions for 10 years, compiling a diverse skillset that includes work all over the world. 

After receiving a degree in Electrical Engineering from McGill University, Medeiros got her start in the industry by volunteering with the Canadian government as an electrical engineering intern, where she travelled to Peru to help improve their water treatment infrastructure. 

Read More

Wholesale SalesWholesale sales rose 0.6% to $64.1 billion in June, partly offsetting the 1.9% decline in May. Sales were up in four of seven subsectors, representing 54% of total wholesale sales.

In dollar terms, two subsectors — miscellaneous, and machinery, equipment and supplies — contributed the most to the increase in June, while the motor vehicle and motor vehicle parts and accessories subsector posted the largest decline.

 

 

 

Read More

 

Changing Scene

  • Prev
Organised by the Hong Kong Trade Development Council (HKTDC), the twin lighting shows - the  ...
WESCO has announced the appointment of Nelson Squires as its Senior Vice President and Chief ...
A Friday night, the end of summer, the weather is mild, and 2,500 people — customers, suppliers, ...
Sonepar Canada has announced the launch of new mobile applications for Gescan Vallen, Sesco and ...
From September 11th to 13th, close to 150 senior executives from IMARK Canada member distributors ...
The electrical market continues to change and NEMRA is preparing its members to meet the challenge. ...
The Canadian Apprenticeship Forum-Forum Canadien sur l’Apprentissage (CAF-FCA) has announced ...
EFC and Kerrwil Publications have partnered again this year to bring you the annual ...
Service Wire Co. is pleased to announce that Charles F. (Chuck) Oldaker, Jr. has been elevated to ...
Electricity Human Resources Canada (EHRC) has issued a call for nominations for the 2019 Awards of ...

ImarkDuring the recently held IMARK Canada 2019 meeting in Niagara Falls, executives from 14 of the leading manufacturers in the Canadian electrical and lighting industry participated in the IMARK Canada Product Stampede on September 13th.

Select manufacturer executives had precisely five minutes to present a key product with superior growth potential to the members of IMARK Canada. Distributor member executives then rated each supplier based on the quality of the presentation and the perceived sales potential of the product being demonstrated.

 

Read More

 

 

Endress+HauserEndress+Hauser has broken ground for its new $28 million Customer Experience Centre for Central and Eastern Canada. When construction of the approximately 47,000 sq ft facility in Burlington is completed late next year, it will provide customers from Manitoba to Atlantic Canada with a generously equipped, state-of-the-art training and support hub for selecting and familiarizing themselves with the company’s latest innovations for process automation.

Last week’s official groundbreaking included a traditional Land Acknowledgment Ceremony performed by Chief R. Stacey Laforme of the Mississaugas of the Credit First Nations.

 

Read More

Peers & Profiles

  • Prev
Jon Llewellyn is the Branch Manager City Electric Supply’s Nanaimo, BC location. “I've worn many ...
Stephanie Medeiros leads ABB Canada’s Electric Vehicle Charging Infrastructure team, as well as ...
Earlier this month Canadian Electrical Wholesaler had the pleasure of tabling a few questions to ...
Canadian Electrical Wholesaler was able to catch up with Sonepar Canada’s Stacey Corley, which was ...
OmniCable was founded in 1977 by partners with deep experience in the US electrical marketplace. ...
On a regular basis, our publications profile members of our industry through their responses to a ...
First and foremost, sitting down with Susan Uthayakumar feels more like sitting down and conversing ...
Sales of electrical supplies from full-line electrical distributors capture the geographic ...
Laura Dempsey has been working as an outside sales representative for E.B. Horsman & Son for ...
Michael Gentile, President and CEO of Philips Lighting Canada, has had a long and distinguished ...

 

Lori BagazzoliBy Blake Marchand

Lori Bagazzoli, Regional Sales Manager for Viscor, is a 20-year industry veteran that has built an interesting career from the bottom up. Beginning as a 19-year old just out of college in customer service with EXM, she gained an intimate knowledge of the electrical and lighting supply business by working her way through various organizational levels.

“I was definitely able to learn the different roles, and understand all the different aspects of the business,” she said, “starting so young, I really had to put in my time to be able to move up.”

 

Read More

 

 

 

Looking Back

  • Prev
The best memory I keep from CEDA is the way that they accepted me when I came into the business. ...
In the 1930s to 1940s, CEDA’s Western Canada membership was very stable with old line independent ...
Prior to the late 1950s there was little if any involvement in CEDA by the so-called “national ...
  As 2017 marks the 150th anniversary of Confederation, we take a look back at an aspect of ...

Copper $US Dollar price per pound

Kerrwil Publications

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2019 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil