Canadian Electrical Wholesaler

Jim Williams

Depending on what you read, and what day you read it, the future of copper is either extremely bleak, or it is about to skyrocket like something we haven't seen in the copper market for years.

This graphic looks like an EKG line in a hospital emergency room. 

Copper Prices

 Source: http://www.infomine.com/investment/metal-prices/copper/ 

After the scandal from a couple of weeks ago from the eastern Chinese port of Qingdao that rocked the worldwide market for copper, the red metal appeared to be on life support. But, just when you think the sky is falling, copper goes on a run of gaining for seven straight sessions, extending the longest rally in almost six months.

Experts say the streak is a result of manufacturing growth in China bolstering demand prospects among signs of tight supply.

"Metals have experienced some short covering today (Monday) as Chinese manufacturing data continues to make positive advances," states weekly contributor Michael Turek, head of the metals desk at NewEdge in New York. He continued by suggesting, "With North American demand robust and Europe not being quite the basket case many anticipated, metals might be embarking upon a compelling enough story to attract in some idle investment capital from the sidelines."

Turek adds, "Late last week metals edged marginally higher in the wake of the Fed's projection of continued low interest rates. Specifically, copper was supported by a slight tightening in the spreads. Overall it looks as though the market is slowly restoring confidence to itself albeit with half an eye on Chinese ports' practices. Dips would look even more attractive if they did not resemble reversals when they suddenly, almost randomly, occur. Not sure what metals were employed in the construction of Rome but it was not built in a day."

Goldman Sachs forecast that copper prices are likely to fall to $6,200 a ton by the end of 2014. "Additionally, the Qingdao situation may lead to a rapid unwind in financing deals resulting in a risk that the target forecast is reached earlier than the end of the year," the bank said in a report.

Traders also expect copper imports to China to decline in coming months, in part due to customs officials tightening checks on incoming shipments.

Examining the trends a little deeper, a preliminary Purchasing Managers' Index (PMI) from HSBC Holdings Plc and Markit Economics rose to 50.8 in June, exceeding the 49.7 median estimate of analysts surveyed by Bloomberg. This is the first time this year the reading finished above 50, signaling expansion. Inventories tracked by the main exchanges in London, Shanghai and New York fell for an eighth session to the lowest since October 2008.

Morgan Stanly released a report earlier this month saying copper consumption is expected to trail output by 90,000 metric tons this year. The market posted an 83,000-ton deficit in March, after a 2,000-ton surplus a month earlier, the International Copper and Study Group said in a report released this week.Copper Prices 2

Supply and demand "favor the bull camp," Tom Power, a senior market strategist at RJO Futures in Chicago said.  "As long as we're continuing to see strong economic data out of China, we're probably going to see calls for more demand."

Copper futures for delivery in September advanced 0.9 percent to settle at $3.142 a pound Monday on the Comex in New York, extending the longest rally since Dec. 16.

 Source: http://www.nasdaq.com/markets/copper.aspx

This article was first published in TEDmag.com on 6/24/2014. We would like to thank them for giving us the permission to publish it in CEW. 

 http://www.tedmag.com/news/Features/The-Copper-Rollercoaster.aspx

 

Economy EmploymentAs a result of widespread measures taken to contain the spread of COVID-19, the Canadian economy contracted 11.6% in April, following a 7.5% drop in March. By the end of May, many businesses had begun to adapt to the new reality by shifting to teleworking, reducing hours, laying off staff, applying for government funding or seeking rent relief.

As pandemic-related restrictions were gradually lifted throughout the summer, the business climate began to improve slightly. For example, real gross domestic product grew 1.2% in August, the fourth consecutive monthly increase, which continued to offset the steepest drops in Canadian economic activity on record that were observed in March and April. 

Read More


 

Swati Vora-PatelBy Swati Vora-Patel

“As a distributor, we need to build capabilities around experiences, data and the technologies that are driving change… It’s important that we listen, experiment and help lead our customers forward.” Chief Marketing Officer, Distributor — from the book Innovate to Dominate: The 12th Edition in the Facing the Forces of Change Series

Mapping your company’s digital transformation begins with an outside-in approach. 

Read More

 

COVID AirBy Angela Jamieson and Marc Laplante

The importance of clean air has been thrust into the spotlight with the emergence of COVID-19 and the rapidly spreading infections related to it. Examples have emerged around the world showing how aerosols may be playing a role in transmission; the choir practise in Washington State where over 80% of their members were infected (primary or secondary)1 after their final practice before shutting down for COVID restrictions, or the restaurant in Guangzhou, China where COVID-19 was theorized to have spread according to the air movement from an air conditioning system2. 

Read More


 

 

Carol McGloganBy Carol McGlogan


When it comes to marketing and customers, some things never change, while some things are always evolving! The parts that never change for marketers are that we need to be where our customers are, when they need us, and with the right information. The parts that are in constant flux are our customers’ buying behaviours and the technologies available to intervene and influence the customer experience.

COVID-19 has forced us all into new habits both personally and in business. For instance, social isolation has caused us to rely more heavily on technology to fill in the gaps. 

Read More


 

Changing Scene

  • Prev
Schneider Electric announced today the promotion of Adrian Thomas to country ...
The Zigbee Alliance, an organization of hundreds of companies creating, maintaining, and ...
ETIM North America (NA) is pleased to announce that the National Electrical Manufacturers ...
Strong rebound in Q3 2020;Revenue up +1.3% organic - Full Year 2020 targets upgraded...   ...
Power management company Eaton Corporation plc announced that earnings per share were $1.11 for the ...
 We may not be able to celebrate in person this year, but EFC would like to invite you to ...
Since 1945 the Stamm family has proudly owned Powrmatic of Canada. Despite this 75 yearlong history ...
The Stelpro Group, owner of Stelpro, the NorthThe Stelpro Group, owner of Stelpro, the ...
IMARK Canada is pleased to announce that Concord Electric Supply, Concord, ON is a member of IMARK ...
E.B. Horsman & Son is excited to announce EMPOWER, their Employee Share Ownership Plan ...
 

 

Zigbee AllianceThe Zigbee Alliance, an organization of hundreds of companies creating, maintaining, and delivering open, global standards for the Internet of Things (IoT), announced an important movement within the Project Connected Home over IP initiative, forming a team dedicated to the development and promotion of the standard for commercial markets.

This move is in alignment with the overall vision for the initiative, which is to develop and promote the adoption of a new, royalty-free connectivity standard, simplifying development for manufacturers and increasing compatibility for customers and consumers.

Read More


 

EatonPower management company Eaton Corporation plc announced that earnings per share were $1.11 for the third quarter of 2020. Excluding charges of $0.05 per share related to acquisitions and divestitures and $0.02 per share related to a multi-year restructuring program, adjusted earnings per share were $1.18.

Sales in the third quarter of 2020 were $4.5 billion. Organic sales were down 9 percent, and the divestitures of the Lighting and Automotive Fluid Conveyance businesses reduced sales by 8 percent, partially offset by 2 percent growth from acquisitions.

 

 

Read More


 

CEW Stelpro flextherm 400The Stelpro Group, owner of Stelpro, is pleased to announce that it has acquired Flextherm, the electric floor heating industry. Flextherm was founded in 1991 by Philippe Charron, who brought a new vision to the market. Sustained work with the standard-setting bodies made it possible to revolutionize the industry by certifying heating cable installations directly on plywood, making the technology accessible to a greater number of people.

Many other innovations, including a complete range of heating cable products and controls and focus on quality and service helped build a strong brand over the years and raised the company to the enviable status it has today. 

Read More


 

Adrian Thomas and Annette ClaytonSchneider Electric announced today the promotion of Adrian Thomas to country president, Canada, effective January 1, 2021. Mr. Thomas succeeds Susan Uthayakumar, who held the role of country president for the past three years. Mr. Thomas will report to North American CEO & President, Annette Clayton.

Susan Uthayakumar, has been appointed as the global leader for Schneider Electric's Sustainability Business Division, reporting to Chief Strategy & Sustainability Officer, Olivier Blum. 

 

Read More

 


EFC 2020 Industry Awards

EFC 2020 Industry AwardsWe may not be able to celebrate in person this year, but EFC would like to invite you to their premier Industry Awards in a new and exciting virtual format. 

This year’s Electro-Federation Canada's 2020 Industry Awards will recognize member recipients through a virtual presentation honouring their strong leadership and commitment to contributing to the health of the industry. EFC's National Advisory Council chairman, Steve Branscombe, Independent Electric Supply, will emcee the Awards on Thursday, December 10th, 2020 at 4:30 pm EST.

 

Read More

 


 

Peers & Profiles

  • Prev
Headquartered in Concord, Ontario, Mercury Lighting services national retail, ...
“Never forget to look at the big picture.” These words of advice are from the father of Jason ...
Electrimat is an independent Quebec-owned company that has specialized for 40 years in the ...
In July, Eaton announced that Vice President, Channel – Electrical Sector, Matt Cleary would be ...
Tim King, Southwire Canada’s new President and first Canadian to assume the role, has taken the ...
Bogdan Botoi is Division Manager for Automation and Control with E.B. Horsman out of British ...
Mission Technical Solutions is a recently established sales agency founded by industry veteran ...

MercuryBy Blake Marchand

Headquartered in Concord, Ontario, Mercury Lighting services national retail, multi-residential/commercial property management, energy service companies (ESCO), and auto dealerships.

“From design to specifications, we offer turn-key services that go beyond the typical distributor model,” explained Mercury Lighting Vice President, Eric Tordjman. Their value-added approach leverages well-established supplier relations to help clients find a lighting solution that suits their needs.

 

 

Read More


 

Jason PrevostBy Line Goyette

“Never forget to look at the big picture.” These words of advice are from the father of Jason Prevost, his first mentor, who worked as a marketing specialist. Jason has repeated them often over the past two years during what might have been the hardest personal crisis of his life.

At a time when he was forced to reassess his professional future, his wife and the mother of his two teenage children was diagnosed with a virulent cancer.

 

Read More


 

Copper $US Dollar price per pound

Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2020 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil